Popular Modern Home Products

1, stainless steel sink before installation preparations

Stainless steel sink is installed, usually installed in the cabinet table. That is, a few days before the completion of renovation carried out quickly sink installation, mainly in order to avoid some of the damage after installation.

First, open the package and remove the tank and drain the tank components, check the parts are correct and complete.

Remove the tank, according to the package for the model were rings openings countertops openings. Check whether there is degumming silencer block, if re-labeled.

Check whether all parts of the faucet crack pipe connecting the two ends of the seal is missing, misplaced, damaged, etc., in order to avoid leakage after installation.

2, stainless steel sink installation

Sink drain must remain in the sink cabinet, angle valve installed before installing the sink. To avoid damage to the outer surface of the faucet faucet installation process should be set faucet or faucet plastic bag carried on the faucet faucet installation.

When connecting the hot and cold water in the face leader, left the hot water pipes connected to the right end of the cold water pipe connections.

When installing bellows, braided hose, be sure to pay attention to tighten the size of the force, too easily damaged threads, it is possible because the seal is too small and not leaking.

After the installation is complete, do the stainless steel sink through water debugging.

Reminder: hole size on stainless steel sink, usually stainless steel sink for the sink hole size diameter size length and width minus 2cm-2.5cm, stainless steel sink opening angle R angle is very important. Finally, if the installation of dual-slot, we proposed two sinks used interchangeably, so as to ensure the tank is not blocked, do not leak.

 

Above information is provided by one of the professional stainless steel sheet suppliers-Foshan Ocean Stainless Steel Co. Ltd.If you have any questions,please contact us.